Standard Sealing Wax Gun | Low Temperature
Our Sealing Wax Gun is a standard, full sized, low temperature glue gun
used with our waxes labeled as Glue Gun Waxes and Faux Sealing wax.
Production times for glue gun methods are almost ten times
faster than traditional wick wax methods.
Exact placement of your melted wax creates perfect seals time after time.
One 4" wax stick of Glue Gun Sealing Wax or Faux Sealing Wax
will create approximately 10-15 seals with a 3/4" embossing coin.
The glue gun will require at least two sticks of wax at a time, as the entering stick pushes the melting stick through.
North American Voltage
40 Watts, 120 Volts
This sized glue gun will accept 1/2" diameter sticks (not "mini" sticks).
☛ Please note: changing wax colors with a glue gun takes a bit of wax to complete.
The wax will melt into a pooling chamber within the gun, and new colors will mix with the old, until enough new wax can be run through to clear the color.
➢ This can create some fun combinations if you plan out your colors!
➢ If it is important for colors to not mix, you may wish to consider:
- Dedicating one glue gun to one color.
- Cutting pieces of lesser used colors to melt in our melting spoon.
- Using the glue gun wax as a wickless sealing wax and melting near a flame.
The stamp functions as intended. The quality of the engraving on the stamp is pitiful. If allowed, I’d send a picture of the poor quality of the letter “S”. Apparently, either the individual making stamp from the brass ‘blank’ . . . was nervous . . . or whatever? It is such poor quality, I’ve decided to purchase another “S” stamp from a competitor.