Highlighting Ink

Our LetterSeals.com bee above is our Red Faux Wax with Gold Highlighting Ink.

Add a wonderful touch to your wax seal with dimensional highlights.

 

When the seal face is lightly rubbed or dabbed onto the ink pad, the ink will transfer to

the recessed areas of the finished wax seal, leaving the raised design free of ink;

almost popping out of the seal.

As a extra bonus, our ink also helps release the seal face from the wax.

1. Have your wax melted and ready to emboss with your seal.
2. Dab/brush your dry seal onto/across the Ink Pad using even pressure.
3. Smooth the ink onto your seal by gently brushing across the surface of the ink pad, to remove any mottled appearance of excess ink.
4. Press your seal with even and gentle pressure into the wax, allow the wax to set for a moment, then lift the seal straight up to release.
5. Clean your seal with a damp cloth once finished.

New Colors not shown:
Daffodil (Pale Yellow) * Whisper Gray (Off White) * Glacier Ice (Pale Blue)
Baby Blue * Thistle Purple/Pink * Rosebud Pink
Papaya Cream * Pistachio Green

Our highlighting inks are pigment inks formulated to dry on the non-porous surfaces of our sealing waxes and faux wax,
& not rub off in the mail or onto fingers once dry.
US made right here in Washington State.

Each ink pad will highlight roughly 50-60 3/4" seals.

 

 

If you find coverage is not as complete as you desire, use a cotton swab to move the ink around as it dries on your seal.

If ink builds on your seal during prolonged use, take a brief moment to scrub the seal with a non scratch abrasive sponge to break away any residue.